Oil Skimmer Blog

Abanaki offers industrial wastewater skimmers specially designed for steel mills where plant maintenance engineers are looking for the lowest cost, most reliable method of removing greases and heavy oils from the steel-mill scale pit. Abanaki oil skimmers use the difference in specific gravity and surface tension between grease and water, allowing the belt to attract grease and oil as the belt passes through the surface of the water. The simple belt-and-motor approach is proven to operate unattended and reliably for decades with little maintenance.

To avoid fines from government and municipal sewer districts, steel mills must limit the amount of grease in wastewater discharged into the environment. The Grease Grabber® oil and grease skimmer provides a continuously operating belt and wiper that can remove up to 160 gallons per hour of heavy greases and oils. Depending on the characteristics of the liquid, the oil/grease skimmer is capable of reducing grease content to fewer than five parts-per-million in water. Reclaimed grease and oil can be re-used or used as furnace fuel, avoiding sucker truck disposal costs.

Using a double drive roller and tail pulley system, the grease skimmer belt runs through wastewater to pick up grease and heavy oil from the surface. The belt travels over the head pulley and then passes through tandem wiper blades, from which oil is scraped off both sides and discharged. A heated hopper keeps grease flowing in cold outdoor temperatures.

The tail pulley features flanges that allow the pulley to roll freely on the inside of the belt without becoming dislodged in turbulent applications. No bearings are needed; the unit does not need to be fastened to the tank. An optional tether and cage assembly is offered to prevent the tail pulley from being dislodged. The Grease Grabber oil skimmer can be used in pits with depths as shallow as one foot or as deep as 100 feet.

To find out which of our skimmers would suit your application the best, please contact our experts at 440-543-7400, or click the button below to get more information about Grease Grabber.

Companies look for effective ways to remove oil from water or coolant to reduce costs and the liability of proper disposal. Another reason for removing the oil is a better work environment. Letting oil remain in the coolant tank allows anaerobic bacteria to grow. Anaerobic bacteria break down the components of coolant, causing it to need changing more frequently. Oil-laden coolant with a high anaerobic bacteria content has two other drawbacks as well. The first drawback is an unpleasant odor caused by the bacteria. The second drawback the smoke generated from the oil-laden coolant coming in contact with the operating cutting tool. One of the easiest ways to remove hydrocarbons from water or coolant is by using an oil skimmer. It is a low maintenance, easy to use tool for removing oil from water or coolant.

The use of an oil skimmer holds many benefits including:

Reduction of Disposal Costs: The cost of disposing oil laden coolant is more expensive than the disposing of oil.

Recycling Opportunities: In some instances, companies may be able to re-use the skimmed oil elsewhere or sell it for recycling, choosing to keep their part of the world cleaner.

Extend Coolant Life: Having oil free coolant can also extend its usefulness and effectiveness, reducing the expense on maintenance and coolant replacement.

Esthetic Benefits: Removing the oil from a machine coolant tank will cut down on the amount of smoke generated from the cutting tool coming into contact with oil laden coolant thereby creating a visibly cleaner workplace.

Extend Tool Life: Removing floating surface oils while aerating and refreshing coolant will extend tool life as well.

Avoid EPA Violations: Many machining and metal working shops turn to aqueous parts cleaning because of limits imposed by the EPA on the discharge of emissions and wastes.

Hygienic Benefits: Keeping coolant oxygenated and oil-free reduces the “rotten egg” odor and bacterial levels are lowered resulting in a cleaner work environment.

Abanaki Corporation manufactures a wide variety of oil skimmers to meet any size application. From a small coolant tank in a CNC lathe to a scale pit in a steel mill, Abanaki Corporation can supply a skimmer to do the job. We manufacture skimmers that can remove from 1 gallon per hour to 200 gallons per hour. We offer turnkey systems with a variety of motors, heat options, stands, and oil concentrators. Our skimmers are used on parts washers, in car washes, wells, steel mills, and any other industry where hydrocarbons need to be removed.

To find out which of our skimmers would suit your application the best, please contact our experts at 440-543-7400, or click the button below to get our Oil Skimming Factbook.

It is a common question asked every day by people in all fields of industry. Machine shops, steel mills, industrial manufacturers, and many others are faced with the problem of removing oils from coolants and wastewater on an everyday basis. They are faced with high disposal and maintenance costs. Some manufacturers are charged extreme amounts to have their contaminated water treated properly by their local water treatment facility.

Companies look for effective ways to remove oil from water or coolant to reduce costs and the liability of proper disposal. Another reason for removing the oil is a better work environment. Letting oil remain in the coolant tank allows anaerobic bacteria to grow. Anaerobic bacteria break down the components of coolant, causing it to need changing more frequently. Oil-laden coolant with a high anaerobic bacteria content has two other drawbacks as well. The first drawback is an unpleasant odor caused by the bacteria. The second drawback the smoke generated from the oil-laden coolant coming in contact with the operating cutting tool. One of the easiest ways to remove hydrocarbons from water or coolant is by using a belt oil skimmer. It is a low maintenance, easy to use tool for removing oil from water or coolant.

Belt oil skimmers work because of the differences in specific gravity between oil and water. Water has a specific gravity of one. Most oils have a specific gravity of less than one. Because of these differences, oil floats to the top of the water where it can be removed. A belt oil skimmer uses oil oleophilic material, (usually made of stainless steel or plastic), in the form of a belt to break the surface tension of the water to attract
and collect the floating oil. The belt passes through a set of wiper blades via a motorized head pulley where the oil is wiped off both sides of the belt. The oil then flows through the skimmer troughs and into a proper disposal container. Because the belt materials used do not attract water, very little coolant or water is picked up.

Some of the advantages of using a belt oil skimmer over other methods to remove oil are the lower initial cost compared to coalescers and other filtration systems, low maintenance, no filters to change, and no mess involved as with absorbent booms or pads. With an oil skimmer, virtually the only required maintenance is replacing a belt and wiper blade set as needed. Next, Abanaki skimmers require very little operating space, usually with no modification to the tank. Finally, our oil skimmers have pick-up rates of up to 200 gph with minimal water or coolant content. Other forms of oil removal cannot perform as well.

There are many instances where companies have turned their disposal costs into income. By using an Abanaki oil skimmer to remove oil from the coolant, one company was able to sell its used oil to be recycled instead of being charged to have the oil-contaminated coolant disposed of. Another money saving benefit was an extended coolant life resulting in lower coolant and maintenance costs. Because of this, the Abanaki oil skimmer paid for itself in a short period of time.

Abanaki Corporation manufactures a wide variety of oil skimmers to meet any size application. From a small coolant tank in a CNC lathe to a scale pit in a steel mill, Abanaki Corporation can supply a skimmer to do the job. We manufacture skimmers that can remove from 1 gallon per hour to 200 gallons per hour. We offer turnkey systems with a variety of motors, heat options, stands, and oil concentrators. Our skimmers are used on parts washers, in car washes, wells, steel mills, and any other industry where hydrocarbons need to be removed.

To find out which of our skimmers would suit your application the best, please contact our experts at 440-543-7400, or click the button below to get our Coolant Guide Book.

The use of an oil skimmer in the machine shop setting holds many benefits. Removing the oil from a machine coolant tank will initiate some esthetic benefits such as cutting down on the amount of smoke generated from the cutting tool coming into contact with oil laden coolant.

When a machine is shut down for the weekend, oil has a chance to come to the surface of the coolant tank. Bacteria that are living in the coolant tank use up the dissolved oxygen in the coolant mix, a process that is sped up by having a layer of oil on the surface. This allows odor causing anaerobic bacteria to thrive, giving off that familiar “rotten egg” smell.

Contrary to popular belief the common types of bacteria found in metalworking fluids do not cause dermatitis. However, if the skin is broken, bacteria that normally inhabit the skin may enter and cause infection. The presence of phosphates and carbonates that increase alkalinity in the coolant, however, can cause dermatitis. These impurities are found in the water being used in the coolant mix.

Separating the oil from the coolant will also help reduce disposal costs. The cost of disposing of oil laden coolant is more expensive than disposing of oil. In fact, in some instances, companies may be able to re-use the oil elsewhere or sell it for recycling. Having oil free coolant can also extend its usefulness and effectiveness, reducing the expense on maintenance and coolant replacement. As the research on the different types of oil skimmers begins, a person will find that there are a variety of skimmers available to them. The most common types are the belt, disk, and tube skimmers. Each type of coolant skimmer has its advantages and disadvantages.

There are also many factors that need to be considered when choosing the correct type of oil skimmer to fit the appropriate application. Factors such as water level fluctuation, water temperature, pH level, the use of rust inhibitors, the amount of oil to be skimmed, quality, and cost, must all be considered when selecting an oil skimmer.

The use of rust inhibitors, high temperatures, and variable pH levels can affect the skimmers ability to pick up oil. Most skimmer manufacturers use a variety of materials for the skimming medium such as plastic, stainless steel, or poly blends to match the solution in which they will be used.

There are a multitude of oil skimmers on the market today. One of the most important things to be considered is the quality of the unit to be purchased. Points of interest should include construction materials, motor design, and the type of warranty that is offered. Is the skimmer housing made of metal or plastic? Is the motor fan-cooled? Does the motor use needle bearings or bronze bearings? How long does the warranty last and what does it cover? Most oil skimmers will perform as advertised, but remember the old adage that “you get what you pay for”.

To find out which of our skimmers would suit your application the best, please contact our experts at 440-543-7400, or click the button below to get our Coolant Guide Book.

Abanaki is proud to announce that our technology partner in the Philippines, Resource One/Fluid Solutions, exhibited at the International Metalworking Philippines (IMTP2018) Show, held in Manila in August of this year. The show, which is backed by associations based in industries such as die and mold making, aerospace, and automotive parts manufacturing, saw participation from companies located in eleven different countries. 

With the manufacturing sector seeing tremendous growth recently in the Philippines, IMTP2018 provided an excellent venue for vendors and manufacturers to establish new relationships. This was certainly the case for the representatives from Resource One/Fluid Solutions, who source the best and most appropriate lubricating technologies and coolant maintenance equipment for the most demanding applications in metalworking, as they were able to showcase some bright new stars in their product line. 

One such piece of equipment is the Abanaki Oil Boss Oil Skimmer, a new addition to the Abanaki coolant maintenance range. The Oil Boss is designed for use with machining centers, namely keeping tool coolant free of tramp oil, which is imperative for extending coolant life and reducing bacterial growth in coolant sumps. These units are small but robust, with an effective magnetic mounting system that allows the unit to be located for easy access. The magnetic mounting base also makes these units portable, so they can be moved from machine to machine as needed. This versatility makes the Oil Boss uniquely capable of conquering your shop’s coolant cleaning demands.

To learn more about the Oil Boss, please contact Abanaki Corporation at 440-543-7400 to find their solution or click the button below to get our Oil Boss Oil Skimmer brochure.

Everyone is thinking “Green”  these days and looking for ways to make the world a cleaner place. Why not start with the groundwater? Pump & treat is an old solution to an old problem. The oil and groundwater are both pumped from the monitoring well. They are usually put into a collection tank and then the groundwater is treated to remove the oil. The PetroXtractor belt oil skimmer allows just the oil to be removed eliminating the need to treat the groundwater. The PetroXtractor line boasts models that are designed to fit in 2”, 4” and 6” (or larger) casings.  The belt oil skimmer uses groundwater surface tension to draw oil to the belt. A new solution to an old problem!

The PetroXtractor groundwater remediation oil skimmer can be placed in an existing monitoring well and remove the oil from the contaminated groundwater quickly and efficiently. Just like the rest of the Abanaki oil skimmers, the PetroXtractor can remove a wide variety of oils including fuel oils, coal tar, and creosote at rates up to 12 gallons per hour. No more bailing, no more expensive pump and treat. The PetroXtractor oil skimmer is the perfect green solution for groundwater remediation.

The Abanaki Solar Powered PetroXtractor gives companies options where electricity is not available. Many times well remediation will occur at an abandoned site where electricity is no longer available and the cost to run electricity is cost prohibitive. Abanaki’s solar powered systems have all the same capacities that the electrical systems offer but without the need for electricity. The Abanaki solar powered system with its battery back-up is designed to work in all parts of the country.

Find out more about PetroXtractor.

Many customers have come to realize that, when they purchase an oil skimmer from Abanaki, it is not a “one and done” deal.  Although the rugged construction of all of Abanaki’s oil skimmers assures a long-lasting, beneficial product, proper maintenance is important.

Lasco Fittings, Inc., a global leader in pipe fittings for Irrigation/Golf, Plumbing, Pool/Spa, and Industrial customers, maintains a 26-acre manufacturing facility in Brownsville, Tennessee.  Hundreds of different parts with multiple manufacturing processes are created at their extensive facility.

Oil plays a vital, yet bothersome and dirty role in their production.  This is where Abanaki Corporation entered the picture for them, as it has for thousands of manufacturers worldwide. 

According to Ryan Hilliard, Maintenance Supervisor for Lasco Fittings, 10 Abanaki 2-inch Tote-It oil skimmers were purchased in 1999.  “Our (manufacturing) machines leak oil into this 110-foot long, 6-foot deep pit.  Our skimmers are permanently mounted on the end of this pit and run 24/7 with very little trouble.” 

Lasco periodically inspects and maintains the units, ensuring that the Abanaki skimmers keep the company running with cost-saving, manufacturing-enhancing, and environmentally-compliant benefits.

Abanaki oil skimmers extend the life of parts washers while also making them more efficient — by ending recontamination of parts.  Abanaki skimmers have actively served for nearly two decades for a high-quality manufacturer like Lasco Fittings, Inc., and they certainly can for you.  Are your parts washers working efficiently?

For further inquiry on Tote-It oil skimmer click below. As always, the Abanaki sales team is here, ready and waiting to help you choose the right oil skimmer for your application.

There are over 25,000 plating companies in the USA operating under challenging manufacturing conditions. Facing high temperatures, abrasives, extreme pH and chemicals in parts washers and holding tanks, effective oil skimming seems like a nearly hopeless task.

Some companies know a solution. A select group of plating companies and metal finishers across the country are extending the life of their parts washer and eliminating recontamination of their parts.   These companies recognized that removing oil from their parts washers and holding tanks would enhance manufacturing efficiencies and provide cost-savings. They found the solution with the trusted the leader in oil skimming over the past 70 years — Abanaki Corporation.   

By working with the oil skimming experts at Abanaki, each of these customers have been able to determine the most appropriate skimmer for their own specific application — the Mighty-Mini, the Tote-It, the Model 4 and the Model 8.

And, rest assured, when all of the other plating companies and metal finishers are ready to address their “hopeless” manufacturing conditions, they'll dial Abanaki Corporation at 440-543-7400 to find their solution.

To find out which of our skimmers would suit your application the best, click the button below to get our E-Book guide.

Refineries are capable of producing a range of materials as different as gasoline, jet fuel, or even asphalt. Like most large-scale, high-capacity plants, they require process optimization and advanced process controls. Refinery oil skimming is necessary for retrieving hydrocarbons from wastewater.

Implementing an oil skimming solution makes it possible for refineries to achieve the goal of recapturing 100% of all hydrocarbons before they go down the drain. A refinery oil skimmer collects the bulk of the hydrocarbons and sends them back to a crude tank. Filtration or chemical treatment can remove any residual oils. Refinery oil skimmers operate 24 hours a day, seven days a week, and require very little oversight and no maintenance. The time they save more than offsets the cost of the electricity needed to operate them.

To find out which of our skimmers would suit your refinery application the best, click the button below to launch our E-Book guide.

For information on how our skimmers work in refinery applications, refinery case studies, and more, click here.