The location, shape, and capacity of a tank or water impoundment are major factors in choosing the right oil skimmer. Also consider fluctuations in water level, turbulence and possible emulsions. Although oil skimmers do not cause emulsions, they can have trouble removing certain types.

Size/Design

Oil and water can emulsify when subjected to turbulence and other mechanical agitation. Avoid this by having water return to the tank below the liquid surface at as low a velocity as practical. Make sure your tank or sump provides quiet areas, weirs, and sufficient volume to allow adequate time for oil/water separation.

Shape

Tanks without nooks and crannies for oil to accumulate in are best. If you have an irregular shape, put the oil skimmer where the largest amount of oil accumulates. Consider a means of directing oil towards the oil skimmer such as a floating boom or baffle plate.

Location/Installation

The physical location and characteristics of the tank and collection container are important. Does skimmed oil need to be pumped from the oil skimmer to the container? Will oil skimmer access for periodic maintenance be a problem? How much mounting space is available? Are tank or container modifications required? Cheap oil skimming systems quickly lose appeal when costs for additional components, increased maintenance and expensive tank modifications are involved.

To learn more about oil skimmers, please contact our experts at 440-543-7400 or visit our website: www.abanaki.com

Abanaki Model 8 Belt Skimmer in Operation

Choosing the right oil skimmer may improve the oil collection rate depending on the application. In a parts washer application, a belt skimmer is usually the best choice because of its small footprint and its ability to use various belt types to handle harsh conditions. Shallow wastewater sumps may have less than one foot of water, requiring a tube type oil skimmer that uses a tube that can float on the surface and collect the oil without bottoming out. Standard coolant sumps may be able to be cleaned up with an inexpensive disk skimmer while other sumps may have very little access. Some sumps can only be accessed with an oil skimmer that can bolt to the side of the tank and have a tube access the sump through a cutout in the side of the tank. If you're not sure which skimmer would best suit your plant's application, contact an Abanaki's sales rep today and they'll help determine which oil skimmer is right for your application! Or click the photo below to launch our Oil Skimmer Selection guide and click the X that fits your application to find out what skimmer is best for you.