As large generators of oily wastewater tighten effluent controls, the U.S. Environmental Protection Agency (EPA) is targeting smaller generators. Some of the firms receiving their attention are smaller manufacturing plants, automotive garages, mobile equipment service shops and truck farms. Many of these firms do not have access to a sanitary sewer system that will accept oily wastewater.
Because disposal in storm sewers also is prohibited, they frequently use injection wells, septic system drain-fields, dry wells and ground pits to dispose of oily wastewater; one EPA concern is that oily wastewater will find its way into an underground aquifer that is a source of drinking water.
Many oily wastes contain organic and inorganic chemicals in concentrations that exceed the primary drinking water standards established by the Safe Drinking Water Act. So, the focus of one EPA program is aimed at preventing contamination of groundwater by controlling oily wastewater recycling at the generator’s site.
Getting Rid of Oily Wastewater
If oily wastewater isn’t recycled, it must be disposed of safely. One option is to have it collected and hauled away by a licensed disposal firm. The annual volume of oily wastewater generated by many shops and plants makes hauling too costly.
Even firms connected to sanitary or industrial wastewater sewer systems have limitations on the oil content in their effluent. When oil concentration exceeds a certain level, usually 100 ppm or less, the generator can get hit with hefty surcharges by the local government providing wastewater treatment.
At some level of oil concentration, the oily water effluent is prohibited from entering the sanitary sewer line.
Wastewater Recycling
With wastewater recycling, the most common methods of oil/water separation include decanting tanks, oil skimming, coalescing, membrane separation and various chemical treatments. Any of these methods can be effective. Selection should be based on economic as well as technical considerations.
Although it is a cost-effective method of reducing contamination, oil skimming often is overlooked as a primary technique. Frequently, this results from the misperception that skimming is only suitable as a pretreatment ahead of other oil/water separation devices.
Certainly, skimming is a retreatment method used to prevent oil overloads in downstream membranes, coalescers and sand bed filters. But it can stand alone as an oil removal method in many applications, reducing oil to only a few parts per million concentrations, depending on conditions. In many locales, this is good enough to allow the water to enter a sanitary sewer system without paying connection surcharges.
More exotic methods of oil removal, such as membrane filtration and chemical treatment, are most often required when tight emulsions and other chemicals must be removed. If an emulsion is the water-in-oil type, a skimmer may do the job.
Types of Oil Skimmers
Oil skimmers usually incur a low initial cost, install easily, offer rugged construction, reliable operation and minimal upkeep. Training personnel for operation, monitoring and routine maintenance is nil.
Still, there are different types of skimmers, and each application requires some analysis to make the best selection. Also, the water collection system must be set up properly in order to get maximum performance from the skimmer.
The six major skimmer configurations for industrial plants and service shops are belt, disk, drum, mop, tube and floating suction types. For all types, the oil or other hydrocarbon liquids must be floating on top of the water. For all but the floating suction type, a moving skimmer medium is pulled through or across the surface to attract the oil.
To learn more about oil skimmers, please contact our experts at 440-543-7400 or visit our website: www.abanaki.com
You are just one step away from downloading Abanaki's most detailed resource on our oil skimming equipment. Simply click at the button to get your ultimate guide now.
